You are here: Home > Tools > Engine > C-Clipper Ris Pin Tool
C-Clipper by


No more wrist-pin woes!

C-Clipper install wrist-pin clips in seconds
Check out a video on YouTube describing this tool - CLICK HERE

For two-stroke & four-stroke motorcycle,
ATV, and other powersports engines

Honda • Kawasaki • Suzuki
Yamaha • Harley Davidson


Original equipment and aftermarket pistons for the same engine may use different diameter wrist pins.
Check the piston you plan to use before ordering.


In most cases we know that C-Clippers will work for you right out of the box. However, because there are literally thousands of pistons out there, we sometimes need specific dimensions and can have the tool
made as needed.

The C-Clipper Way is the Better Way

BUX Tools C-Clipper™ does the job in seconds a side, without overstressing the clip, and without marring
the piston; saving time for the engine mechanic and the do-it-yourself racer. It’s as simple as this:

 nose clipper - step 1 Load the installer tool with the wrist pin clip
Slide it into its matching sleeve
Push the installer home
nose clipper - step 2
 nose clipper - step 3
Prices starting at $43.50
2-stroke $43.50
4-stroke $59.00
Harley-Davidson $67.50
Plain Sleeve C-Clipper Kits

The table lists stock items. Kits include plain sleeve, short installer,
and appropriate Delrin V-block.
Plain Sleeve
CLICK ON the picture above for more detail.

Kit # Pin Diam. V-block Piston Typical Engines    
304 12mm A 39-54mm 50 & 65cc 2-strokes: Honda, KTM, Polaris Sportsman 90, Scrambler $43.50
407 13mm A 39-54mm 2-strokes: Legacy 80cc incl. Honda CR80, Suzuki, Yamaha4-strokes: Honda 50 & 77cc, Badger/Raptor 80cc, Yamaha 90cc, Kawasaki/Yamaha 110cc $43.50 
303 14mm B 47-56mm Most 80 and 85cc 2-strokes: Honda, KTM, Kawasaki, Suzuki, Yamaha, etc. $43.50
301 15mm B 47-56mm Most 125cc 2-strokes: Honda, Kawasaki, KTM, Suzuki, Yamaha, etc. $43.50
401 16mm C 64-79 mm ATVs: Honda, Kawasaki, KTM, Suzuki, Yamaha. Also for Watercraft, Snowmobiles, etc. $43.50
302 18mm C 64-79mm Most 250cc 2-strokes: Honda, Kawasaki, KTM, Suzuki, Yamaha, etc. Also most KTM 300cc. $43.50
     
Undercut Sleeve C-Clipper Kits

The table lists stock items. Kits include plain sleeve, long installer,
and appropriate aluminum V-guide.
Undercut Sleeve
CLICK ON the picture above for more detail.

Kit # Pin Diam. V-guide Piston Typical Engines    
402 0.791” 0.792” M Standard & Big Bore Harley Davidson* Evolution Series, Buell $67.50
403 20mm M 85-99 mm Most 4-strokes using 20mm pins $59.00
404 16mm L 69-85mm Most 4-strokes using 16mm pins $59.00
405 17mm L 69-85mm Most 4-strokes using 17mm pins $59.00
406 18mm L 69-85mm Most 250cc 18mm 4-strokes $59.00
408 18mm M 85-99mm Most 400-450cc 18mm 4-strokes $59.00
409 19mm L 69-85mm Most 250cc 19mm 4-strokes $59.00
410 19mm M 85-99mm Most 400-450cc 19mm 4-strokes $59.00
* Including most after-market standard bore and big bore engines. Not available at this time for Harley-Davidson Twin Cam, Iron Sportster, and other legacy engines    
     
Sort By:
Page of 1
Plain Sleeve C-Clipper Kits - 15mm Pin, B V-Guide, 47-56mm Piston - Most 125cc 2-strokes: Honda, Kawasaki, KTM, Suzuki, Yamaha, etc.
: $43.50

Plain Sleeve C-Clipper Kits - 15mm Pin, B V-Guide, 47-56mm Piston - Most 125cc 2-strokes: Honda, Kawasaki, KTM, Suzuki, Yamaha, etc.