You are here: Home > Battle Factory > Sprockets w/ built-in bearings

SPROCKET ASSY BEARING TYPE - RS125R/GPmono


Sprocket and BEARING were combined in Cooperation development with the AFAM Corporation.
This configuration stabilizes the sprocket thereby cutting down on the wear and tear of the chain
and rubber dampers.
They are produced in 7075 aluminum alloy, the surface hard Alumite and Teflon coating to
decrease friction.
We also carry the RCD and Talon sprocket carriers
See Below

Each Sprocket will need 1 each of the spacer and collar to complete install. BA25-01
and BA25-02. The spacer and collar will be moved from sprocket to sprocket for fitting.

BA25-33RS125 425 Chain 33T Sprocket w/bearing carrier built in.
Each sprocket comes with Bolts and nuts to fit dampers. You will need the spacer and collar to complete install. BA25-01 and BA25-02
$136.75
BA25-34RS125 425 Chain 34T Sprocket w/bearing carrier built in."
BA25-35RS125 425 Chain 35T Sprocket w/bearing carrier built in."
BA25-36RS125 425 Chain 36T Sprocket w/bearing carrier built in."

BA25-37

RS125 425 Chain 37T Sprocket w/bearing carrier built in.

"

BA25-38

RS125 425 Chain 38T Sprocket w/bearing carrier built in.

"

BA25-39

RS125 425 Chain 39T Sprocket w/bearing carrier built in.

"

BA25-40

RS125 425 Chain 40T Sprocket w/bearing carrier built in.

"
BA25-41RS125 425 Chain 41T Sprocket w/bearing carrier built in."
BA25-42RS125 425 Chain 42T Sprocket w/bearing carrier built in."

BA25-01

DISTANCE COLLAR INNER
(one Needed at initial purchase for install of the sprockets above)

$31.90

BA25-02

COLLAR REAR WHEEL SIDE
(one Needed at initial purchase for install of the sprockets above)

$22.80

BA25-03SPROCKET BOLT NUT SET of 1 nut and 1 bolt M8 X 15
(3 needed for complete RS125 wheel)(4 needed for Mono wheel)
$8.50
BA25-06SPROCKET BOLT NUT SET of 1 nut and 1 bolt M10 X 15
(3 needed for complete RS125 wheel)
$1.20