|
SPROCKET ASSY BEARING TYPE - RS125R/NSF250R/MD250H |
Sprocket and BEARING were combined in Cooperation development with the AFAM Corporation. This configuration stabilizes the sprocket thereby cutting down on the wear and tear of the chain and rubber dampers. They are produced in 7075 aluminum alloy, the surface hard Alumite and Teflon coating to decrease friction. Each Sprocket will need 1 each of the spacer and collar to complete install. BA25-01 and BA25-02. The spacer and collar will be moved from sprocket to sprocket for fitting.
|
BA25-33 | RS125 425 Chain 33T Sprocket w/bearing carrier built in. Each sprocket comes with Bolts and nuts to fit dampers. You will need the spacer and collar to complete install. BA25-01 and BA25-02 |
| | |
BA25-34 | RS125 425 Chain 34T Sprocket w/bearing carrier built in. |
| | |
BA25-35 | RS125 425 Chain 35T Sprocket w/bearing carrier built in. |
| | |
BA25-36 | RS125 425 Chain 36T Sprocket w/bearing carrier built in. |
| | |
BA25-37 | RS125 425 Chain 37T Sprocket w/bearing carrier built in. |
| | |
BA25-38 | RS125 425 Chain 38T Sprocket w/bearing carrier built in. |
| | |
BA25-39 | RS125 425 Chain 39T Sprocket w/bearing carrier built in. |
| | |
BA25-40 | RS125 425 Chain 40T Sprocket w/bearing carrier built in. |
| | |
BA25-41 | RS125 425 Chain 41T Sprocket w/bearing carrier built in. |
| | |
BA25-42 | RS125 425 Chain 42T Sprocket w/bearing carrier built in. |
| | |
| | | | |
BA25-01 | DISTANCE COLLAR INNER (one Needed at initial purchase for install of the sprockets above) | | | |
BA25-02 | COLLAR REAR WHEEL SIDE (one Needed at initial purchase for install of the sprockets above) | | | |
| |
| | |
| |
|