 Electric Shifting Systems
ARE YOU READY TO DO BATTLE?
Karters -Check out our Shifter-Kart System
 | The Battle Shifter by Battle Factory is a lightweight, compact semi-automatic up shifting system that provides quick, smooth shifts every time. Unlike other popular shifters, the Battle Shifter automatically adjusts the duration of the ignition cut to match RPM's - longer cuts at low RPM's and shorter ones at High RPM's. Unlike other shifters, the Battle Shifter is not simply a switch that cuts power completely. It works by reducing current to the ignition coil to stop spark. This ensures that juice still flows to your gauges eliminating temporary flashes and reducing overall system shock. The Battle Shifter automatically stops functioning under 3,000 RPM's to prevent engine stall during slow speeds and idle. The Battle Shifter is easy to install. It comes setup from the factory for a wide selection of bikes both 2 and 4 cycle including: NSR and TZM 50's, RS & TZ125 & 250's, NSR & TZR 250's, CBR, VFR, FZR, ZXR, FZ, GSX, XJR & Zepher 400's, RC 45's, TDM 850's, Ducati 916 & 996's, CBR 900's, YZF-R1's, CB, VTR & TL 1000's, GSX, CBR & ZRX 1100's and others. The Battle Shifter comes with an Easy to follow manual and a small screwdriver for fine-tune adjustments. Note: For the TZ250, it is necessary to use a stock TZ125 shift pedal (included) in order to allow for the length of the shifter rod. The RS250 also comes with the necessary Battle shift pedal. | 
TZ250 | 
RS125 Installation |
*REPLACEMENT SHIFTRODS AVAILABLE.
*IF YOU DON'T SEE YOUR BIKE IN THE LIST ABOVE, DON'T WORRY! BATTLE SHIFTERS CAN BE MADE TO FIT ALMOST ANY BIKE THAT EMPLOYS A SHIFTROD/ SHIFTLINKAGE SYSTEM. JUST MEASURE THE LENGTH OF YOUR SHIFTROD AND BATTLE WILL MAKE ONE TO CUSTOM FIT.
*Shift Pattern: REG 1 down, 4/5 up
GP 1 up, 4/5 down
NOTES:
*1 Includes the necessary Battle RS 125 shift lever.
*2 Will need to order TZ125 shift lever 4JT-18110-10
Installation instructions  If you do not have Acrobat reader, click here 
RS125 Shifter RS250 Shifter MH80 Shifter TZ250 Shifter Ducati 996 Shifter For some installations we need additional information to make up the rod type and length for your installation. CLICK HERE for that sheet, fill it out and email it back to us. Instructions for reversing the Battle Rod Switch between compression and extension. |
.JPG)
.JPG){kind=link}