Racer's Parts in Racer's Time
RISING SUN CYCLES		 HOME | CONTACT
Motorcycle Sales OEM Parts and Technical Info Accessories Tools LINKS  
Additional Oils, Lubes and Cleaners - CLICK HERE Permatex Products
    Sealents
    Cleaners and Penetrant
    Gloves - Mechanics and Nitrile

MotoSeal® 1 Ultimate Gasket Maker Grey

For two and four cycle engines. Solvent-based bond fully seals within 20 minutes. Forms a tough flexible bond that is highly effective on irregular and uneven joint surfaces. Ideal for use on frequently disassembled engines. Resists gasoline and other damaging fluids. Withstands temperatures 350°F (177°C) continuous, 400°F (204°C) intermittent.

Suggested Applications: Transmission case halves, cylinder head top covers, center & end covers (transmissions), crank case halves, cam covers, exhaust manifold seals, timing chain cases, side covers, clutch housings
Item # Container Size  
29132 2.7 oz. tube, carded
Permatex® GEL TWIST™ Medium Strength Threadlocker BLUE Gel

The patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it...on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Mil-Spec (S-46163A) Type II, Grade N.

Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs; also ideal for vertical applications
Item # Container Size  
24010 10 g GEL TWIST™ applicator, carded
Permatex® Penetrating Grade Threadlocker GREEN

OEM specified. A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2" (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly.

Suggested Applications: Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, hairline cracks
 
Item # Container Size  
29000 6 ml tube, carded
Permatex® GEL TWIST™ High Strength Threadlocker RED Gel

The patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it...on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications. Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.

Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts; also ideal for vertical applications
Item # Container Size  
27010 10 g GEL TWIST™ applicator, carded
Permatex® Medium Strength Threadlocker BLUE

OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.

Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs
 
Item # Container Size  
24200 6 ml tube, carded
Permatex® High Strength Threadlocker RED

OEM specified. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.

Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts
 
Item # Container Size  
27100 6 ml tube, carded
Permatex® Instant Gas Tank Repair

Instantly seals small holes in gas tanks without tank removal. Sticks to “gasoline-wet” metal. Dries to a hard seal. Hardens in 60 minutes. Easy-to-use, two-part epoxy ribbon. No measuring. Permanent.

Suggested Applications: Gas tanks in cars, trucks, farm equipment
 
Item # Container Size  
12020 1 oz. stick, carded