|
|
|
|
 |
Sprocket Collar
|
|

Lightly used sprocket collar - fits RS125 (89-04), MD250H Honda part number 42617-NF4-770 or 42617-NF4-753
|
|
 |
|
|
|
|
 |
Used NF4 BUSH SET,RR ENG MT
|
|

Used NF4 engine rear bushing set for pre-'95 Honda RS125.
|
|
 |
|
|
|
|
 |
Sprockets RS125 - NOS
|
|

New old stock sprockets for Honda RS125 (89-04) and Moriwaki MD250H. These are all new and unused sprocket specialist brand. Various sizes.
|
|
 |
|
|
|
|
 |
Used footpegs - RS125 pre-95 set
|
|

Used OEM footpegs for Honda RS125 pre-95. Look closely to make sure they work for you. These are sold as a pair and have definitely been down the road at least once.
These would make great cheap spares.
|
|
 |
|
|
|
|
 |
Used left side radiator mount - pre 95 RS125
|
: $40.00 Sale Price: $24.99 Save $15.01!
|
|
|

Used 19053-NF4-770 radiator mounting bracket for 89-94 Honda RS125. Not 100% sure this is the part number, so please look at the picture to make sure it's the part you need.
|
|
 |
|
|
|
|
 |
Aftermarket used exhaust hanger - pre 95 RS125
|
|

Used 18355-NF4-770 exhaust mounting bracket for 89-94 Honda RS125.
|
|
 |
|
|
|
|
 |
Used OEM left rearset - RS125 pre-95 bent
|
|

Used OEM left rearset for Honda RS125 pre-95. Look closely to make sure they work for you. This has a slight bend in it. May be something you can tap straight with a little heat and patience.
These would make great cheap spares.
|
|
 |
|
|
|
|
 |
Rear sprocket spacer - NX4 and MD250H
|
|

Rear sprocket spacer assembly. Looks brand new, but bearing has a little notch to it. Likely need new bearing (91052-nf4-000) just to be safe. Contains parts: 42304-nx4-000 and 42617-nf4-770
|
|
 |
|
|
|
|
 |
NOS brake pads - EBC HH for 89-94 RS125
|
|

NOS brake pads - EBC HH for 89-94 RS125
|
|
 |
|
|
|
|
 |
NOS brake pads - Ferodo for 89-94 RS125
|
|

NOS brake pads - Ferodo for 89-94 RS125
|
|
 |
|
|
|
|
 |
Small end bearings NF4/NF5 - open package
|
|

Clip, piston pin, 14 mm - Honda RS125, 1989-1990 CB400F
|
|
 |
|
|
|
|
 |
stay, muffler assembly - used
|
|

stay, muffler assembly - used
|
|
 |
|
|
|
|
 |
PISTON RINGs - NOS 3 pack
|
|

PISTON RING (CONSTRUCTOR) Honda RS125 - SOLD OUT
|
|
 |
|
|
|
|
 |
PISTON RING (CONSTRUCTOR) Honda RS125/250 NOS
|
|

PISTON RING (CONSTRUCTOR) Honda RS125 - SOLD OUT
|
|
 |
|
|
|
|
 |
NF4 left rearset - RS125 pre-95
|
|

Aftermarket rearset for pre-95 Honda RS125. A little bit of brillo and a touch of elbow grease and it will look great again! Sold as a left side only. I have a stack of these, so picture may not be of actual one I send, but they are all in similar condition.
|
|
 |
|
|
|
|
 |
Cam Mount
|
|

Universal mount for Moto3 fork - lightly used Mount your go-pro, GPS, etc on this nice fork mount.
|
|
 |
|
|
|
|
 |
Used Clutch lever and perch - RS125
|
|

Used clutch lever and perch for Honda RS125 ('89-on) No crash damage. Would make a great addition to anyone's crash spares.
|
|
 |
|
|
|
|
 |
Fork springs used - RS125 89-94
|
|

Used front fork springs. SPRING, FRONT FORK (k=0.65)
|
|
 |
|
|
|
|
 |
NF4 rearsets - RS125 pre-95 set
|
|

Aftermarket rearsets for pre-95 Honda RS125. A little bit of brillo and a touch of elbow grease and they will look great again! Sold as a set of 2.
|
|
 |
|
|
|
|
 |
Small end bearings NF4/NF5 - appear new pack of 6
|
|

Small end bearings - 6 'new' wrist pin bearings for NF5/4 I assume they are 91008-NF5-711, but not in original packaging so not 100% sure.
|
|
 |
|
|
|
|
 |
Coil - pre 95 RS125
|
|

Used coil for pre-95 Honda RS125. Looks in good shape, but I don't have a bike to test it on to be sure.
|
|
 |
|
|
|
|
 |
NOS Honda swingarm castle nut tool
|
|

NOS Honda swingarm castle nut tool - 07908-4690002
|
|
 |
|
|
|
|
 |
RS125 Cylinder Head (89-94)
|
|

OEM cylinder head for an older '89-94 Honda RS125. Very good condition. Just has some old tape residue that needs to be removed.
|
|
 |
|
|
|
|
 |
Used PVM cast iron rotor - RS125
|
|

Used front rotor for Honda RS125 ('89-on) This is a cast iron rotor and the surface just has light rust. The bobbins are pretty loose, so likely will need to be replaced.
|
|
 |
|
|
|
|
 |
Graves brand Tire warmers - Moto3
|
|

Graves brand tire warmers for Moto3 size rims - should fit all Honda RS125, TZ125, MD250H, and NSF250R.
Plugged in and warmed up as they should.
|
|
 |
|
|
|
|
 |
NF4Hjelm
|
|

NOS Hjelm - Honda RS125 rearsets and pegs set - fits '89-94
|
|
 |
|
|
|
|
 |
HONDA/HRC - A C GENERATOR ASSY - used
|
|

HONDA/HRC - A C GENERATOR ASSY - used
|
|
 |
|
|
|
|
 |
Battle brand Tire warmers - Moto3
|
|

Battle brand tire warmers for Moto3 size rims - should fit all Honda RS125, TZ125, MD250H, and NSF250R. They look like they haven't been used, but if they have, it was very light use.
Plugged in and warmed up as they should.
|
|
 |
|
|
|
|
 |
Used Tire warmers - Moto3 size
|
|

FRONT FORKLIFT STAND RS125 95-, TZ125, NSF250R, GPMONO, MD250
|
|
 |
|
|
|
|
 |
RS125 Cover Comp Right (89-94)
|
|

OEM Right side case cover for an older '89-94 Honda RS125. Looks to be brand new to me. 11340-NF4-780
|
|
 |
|
|
|
|
 |
Tachometer - used
|
|

Used but appears new condition Tachometer
|
|
 |
|
|
|
|
 |
AC Generator Assy - pre 95 RS125
|
|

Lightly used AC Generator Assy for pre-95 Honda RS125. This part looks nearly new with only a few marks from the mounting bolts.
|
|
 |
|
|
|
|
 |
Like new Tire warmers - Moto3 size
|
|

FRONT FORKLIFT STAND RS125 95-, TZ125, NSF250R, GPMONO, MD250
|
|
 |
|
|
|
|
 |
RS125 Engine used (NF4)
|
|

Used NF4 Honda RS125 engine. History is unknown, so assume it will need a full rebuild. Cylinder, head, transmission, internal clutch and gears all look in good shape. Engine stamp indicates it's a 1991 motor, but should work in all NF4 model bikes.
This would be a great way to have a lot of spares that you can't buy new from Honda anymore.
|
|
 |