|
|
|
|
|
Sprocket Collar
|
|
Lightly used sprocket collar - fits RS125 (89-04), MD250H Honda part number 42617-NF4-770 or 42617-NF4-753
|
|
|
|
|
|
|
|
Pedal knob - MD250H
|
|
Toe pedal for 2009 Moriwaki MD250H - NOS. May fit other applications, but this was OEM for the 2009 MD250h.
|
|
|
|
|
|
|
|
Sprockets RS125 - NOS
|
|
New old stock sprockets for Honda RS125 (89-04) and Moriwaki MD250H. These are all new and unused sprocket specialist brand. Various sizes.
|
|
|
|
|
|
|
|
MD250 Shifter support
|
|
NOS shifter shaft support bracket. 24620-10512-00
|
|
|
|
|
|
|
|
Rear sprocket spacer - NX4 and MD250H
|
|
Rear sprocket spacer assembly. Looks brand new, but bearing has a little notch to it. Likely need new bearing (91052-nf4-000) just to be safe. Contains parts: 42304-nx4-000 and 42617-nf4-770
|
|
|
|
|
|
|
|
MD250 Foot peg set OEM
|
|
NOS foot peg set for 2009 Moriwaki MD250H. Can be made to fit RS125, NSF250r, and 2008 MD250H with use of own shortened bolt. This was the OEM setup for the 2009 model.
|
|
|
|
|
|
|
|
Exhaust Hanger - MD250H
|
|
Exhaust hanger bracket for Moriwaki MD250H - OEM NOS
|
|
|
|
|
|
|
|
Hjelm Sprocket carrier wrench
|
|
Used Hjelm sprocket carrier holder. Works on Talon sprocket carrier and makes changing them significantly easier.
|
|
|
|
|
|
|
|
Ohlins Spring
|
|
Used Ohlins spring - check fitment 1093-14/60 LD97
|
|
|
|
|
|
|
|
13011-KRN-850 - HONDA/HRC - RING SET (STD) for 2008 Honda CRF250X
|
|
RING SET (STD) for 2008 Honda CRF250X, all Moriwaki MD250H
|
|
|
|
|
|
|
|
Fork springs used - RS125, NSF250, MD250
|
|
Used front fork springs. One size softer than stock RS125 springs, 2 sizes softer than NSF stock springs. SPRING, FRONT FORK (k=0.6)
|
|
|
|
|
|
|
|
Front Fender
|
|
New Hotbodies brand front fender for Honda RS125. Fits all years from 1995 on,but is styled after the 2004 model bodywork. Never been drilled or mounted on a bike. Will also fit MD250H and NSF250R.
|
|
|
|
|
|
|
|
New Eibach rear spring - RS125/NSF/MD
|
|
Rear Eibach spring for RS125/MD/NSF. See picture for specs
|
|
|
|
|
|
|
|
Moto3 Crash spares
|
|
Several new and used bits that are good to have in your spares bin for crashes and such. Will fit all NSF250R, MD250H, and 95+ Honda RS125
Brake lever, fairing side mounts, clutch perch, axle nut and slider
|
|
|
|
|
|
|
|
Used rearsets - RS125/NSF/MD
|
|
Used rearsets for Honda RS125, NSF250R, and even should fit the MD250H. Look closely to make sure they work for you. These are sold as a pair and should work on either side of the bike.
These would make great cheap crash spares!
|
|
|
|
|
|
|
|
Swingarm Tool
|
|
New old stock - swingarm tool for RS125. Made by Hjelm, and not available anymore. Same as Honda part: 07908-4690002
|
|
|
|
|
|
|
|
Used Front Rotor
|
|
Used front rotor - fits RS125 (NX4 and NF4), MD250, NSF250R, RS250 (NX5)
|
|
|
|
|
|
|
|
Used Front Rotor
|
|
Used front rotor - fits RS125 (NX4 and NF4), MD250, NSF250R, RS250 (NX5)
|
|
|
|
|
|
|
|
Brake pedal - RS125, MD250, NSF250R
|
|
Used PEDAL COMP BRK. Looks brand new. Likely removed from a new bike. Fits '95 on RS125, MD250H, and NSF250R
|
|
|
|
|
|
|
|
Remus exhaust hanger and bracket - MD250
|
|
Exhaust hanger bracket and carbon fiber muffler bracket for Remus exhaust system fitted on an MD250H Moriwaki. New old stock, so it will have some minor scuffs, but no crash damage.
|
|
|
|
|
|
|
|
Rearset MD250H left side - NOS
|
|
NOS left side rearset from 2009 Moriwaki MD250H. Will make a great upgrade to the 2008 MD250h or could even be used on RS125 and NSF250R.
|
|
|
|
|
|
|
|
NOS front sprockets
|
|
17t and 18t front sprockets for the MD250H. One is Moriwaki brand, not sure what the other one is. No longer available from Moriwaki.
|
|
|
|
|
|
|
|
NOS Honda swingarm castle nut tool
|
|
NOS Honda swingarm castle nut tool - 07908-4690002
|
|
|
|
|
|
|
|
NOS Galfer rear wave rotor - fits NSF250r, RS125, and MD250H - weight 11oz
|
|
Galfer rear wave rotor - fits NSF250r, RS125, and MD250H - weight 11oz
|
|
|
|
|
|
|
|
Wossner Honda CRF250 & CRF250X 13.5:1 '06- "09, 77.95mm
|
: $160.00 Sale Price: $99.00 Save $61.00!
|
|
|
Wossner Honda CRF250 & CRF250X 13.5:1 '06- "09, 77.95mm #8656DA Piston kit (rings- 780XAS, PIN- WP959, CLIP- CW16) Clearance:0.04mm
|
|
|
|
|
|
|
|
RS125/NSF250R/MD250H Sprocket with bearing carrier built in. Comes with Bolts and nuts to fit dampers. You will need the spacer and collar to complete install. BA25-01 and BA25-02
|
: $172.95 Sale Price: $115.00 Save $57.95!
|
|
|
RS125/NSF250R/MD250H Sprocket with bearing carrier built in. Comes with Bolts and nuts to fit dampers. You will need the spacer and collar to complete install. BA25-01 and BA25-02
|
|
|
|
|
|
|
|
ALUMINUM CLIP ON BAR SET W/CAPS (94- RS125/ TZ125 - 44mm ID - 15�ANGEL )
|
: $157.96 Sale Price: $120.00 Save $37.96!
|
|
|
ALUMINUM CLIP ON BAR SET W/CAPS (94- RS125/ TZ125 - 44mm ID - 15�ANGEL )
|
|
|
|
|
|
|
|
Clipon set - nos
|
|
Clipon set for Honda RS125 ('95-on) and all NSF250R 53110-NX4-000 and 53120-NX4-000 used for mockup only. Otherwise they are brand new. Would make a great emergency set of spares.
|
|
|
|
|
|
|
|
NOS Hjelm right rearset +3cm, shift lever, footpeg
|
|
NOS Hjelm - Honda RS125 and NSF250R Step plate, fits left side, +3cm length Battle shift lever, and footpeg included
|
|
|
|
|
|
|
|
Rearset MD250H right side - NOS
|
|
NOS right side rearset from 2009 Moriwaki MD250H. Will make a great upgrade to the 2008 MD250h or could even be used on RS125 and NSF250R.
Complete with everything seen in the picture.
It's always great to have a complete spare setup in the toolbox just in case.
|
|
|
|
|
|
|
|
Sprocket Carrier 3-pack
|
|
Like new condition - Intuitive Race Products brand sprocket carriers. 3-pack. Fit '95+ Honda RS125, and all MD250H racebikes. Use RS125 or dual pattern sprockets and these work on all NSF250R bikes as well.
Fit one of these to your 3 most used sprockets and make gearing changes super fast and easy.
|
|
|
|
|
|
|
|
Used Sprocket kit
|
|
This is a lightly used set of sprockets with the integrated bearing. These were developed in collaboration with AFAM, so you know the quality is outstanding!
Some sprockets are still new, but most have just minor wear.
Comes with one set of the spacers needed to use this kit on the '95 or newer RS125 Honda, all MD250H, and all NSF250r using RS125 sprockets or dual pattern sprockets. No need for the Talon, IRP, and HRC sprocket carriers when you use this kit.
Kit comes with custom case with aluminum holders to keep things in order. Very nicely made carrier.
|
|
|
|
|
|
|
|
Rear shock
|
|
Lightly used Reactive brand rear shock for RS125/MD250/NSF250.
|
|
|